diff options
Diffstat (limited to 'bf_basic/source/sbx/sbxscan.cxx')
-rw-r--r-- | bf_basic/source/sbx/sbxscan.cxx | 509 |
1 files changed, 509 insertions, 0 deletions
diff --git a/bf_basic/source/sbx/sbxscan.cxx b/bf_basic/source/sbx/sbxscan.cxx new file mode 100644 index 000000000..daf3e8a1d --- /dev/null +++ b/bf_basic/source/sbx/sbxscan.cxx @@ -0,0 +1,509 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <tools/errcode.hxx> +#include "sbx.hxx" +#include "sbxconv.hxx" + +#include "bf_svtools/syslocale.hxx" + +#if defined ( UNX ) +#include <stdlib.h> +#endif + +#include <rtl/strbuf.hxx> +#include <vcl/svapp.hxx> +#include <math.h> +#include <string.h> +#include <ctype.h> + +#include "sbxres.hxx" +#include <bf_svtools/svtools.hrc> + +namespace binfilter { + +void ImpGetIntntlSep( sal_Unicode& rcDecimalSep, sal_Unicode& rcThousandSep ) +{ + SvtSysLocale aSysLocale; + const LocaleDataWrapper& rData = aSysLocale.GetLocaleData(); + rcDecimalSep = rData.getNumDecimalSep()[0]; + rcThousandSep = rData.getNumThousandSep()[0]; +} + +// Scannen eines Strings nach BASIC-Konventionen +// Dies entspricht den ueblichen Konventionen, nur dass der Exponent +// auch ein D sein darf, was den Datentyp auf SbxDOUBLE festlegt. +// Die Routine versucht, den Datentyp so klein wie moeglich zu gestalten. +// Das ganze gibt auch noch einen Konversionsfehler, wenn der Datentyp +// Fixed ist und das ganze nicht hineinpasst! + +SbxError ImpScan( const XubString& rWSrc, double& nVal, SbxDataType& rType, + USHORT* pLen, BOOL bAllowIntntl, BOOL bOnlyIntntl ) +{ + rtl::OString aBStr(rtl::OUStringToOString(rWSrc, RTL_TEXTENCODING_ASCII_US)); + + // Bei International Komma besorgen + char cIntntlComma, cIntntl1000; + char cNonIntntlComma = '.'; + + sal_Unicode cDecimalSep, cThousandSep = 0; + if( bAllowIntntl || bOnlyIntntl ) + { + ImpGetIntntlSep( cDecimalSep, cThousandSep ); + cIntntlComma = (char)cDecimalSep; + cIntntl1000 = (char)cThousandSep; + } + // Sonst einfach auch auf . setzen + else + { + cIntntlComma = cNonIntntlComma; + cIntntl1000 = cNonIntntlComma; // Unschaedlich machen + } + // Nur International -> IntnlComma uebernehmen + if( bOnlyIntntl ) + { + cNonIntntlComma = cIntntlComma; + cIntntl1000 = (char)cThousandSep; + } + + const char* pStart = aBStr.getStr(); + const char* p = pStart; + char buf[ 80 ], *q = buf; + BOOL bRes = TRUE; + BOOL bMinus = FALSE; + nVal = 0; + SbxDataType eScanType = SbxSINGLE; + // Whitespace wech + while( *p &&( *p == ' ' || *p == '\t' ) ) p++; + // Zahl? Dann einlesen und konvertieren. + if( *p == '-' ) + p++, bMinus = TRUE; + if( isdigit( *p ) ||( (*p == cNonIntntlComma || *p == cIntntlComma || + *p == cIntntl1000) && isdigit( *(p+1 ) ) ) ) + { + short exp = 0; // >0: Exponentteil + short comma = 0; // >0: Nachkomma + short ndig = 0; // Anzahl Ziffern + short ncdig = 0; // Anzahl Ziffern nach Komma + rtl::OStringBuffer aSearchStr(RTL_CONSTASCII_STRINGPARAM( + "0123456789DEde")); + // Kommas ergaenzen + aSearchStr.append(cNonIntntlComma); + if( cIntntlComma != cNonIntntlComma ) + aSearchStr.append(cIntntlComma); + if( bOnlyIntntl ) + aSearchStr.append(cIntntl1000); + const char* pSearchStr = aSearchStr.getStr(); + while( strchr( pSearchStr, *p ) && *p ) + { + // 1000er-Trenner ueberlesen + if( bOnlyIntntl && *p == cIntntl1000 ) + { + p++; + continue; + } + + // Komma oder Exponent? + if( *p == cNonIntntlComma || *p == cIntntlComma ) + { + // Immer '.' einfuegen, damit atof funktioniert + p++; + if( ++comma > 1 ) + continue; + else + *q++ = '.'; + } + else if( strchr( "DdEe", *p ) ) + { + if( ++exp > 1 ) + { + p++; continue; + } + if( toupper( *p ) == 'D' ) + eScanType = SbxDOUBLE; + *q++ = 'E'; p++; + // Vorzeichen hinter Exponent? + if( *p == '+' ) + p++; + else + if( *p == '-' ) + *q++ = *p++; + } + else + { + *q++ = *p++; + if( comma && !exp ) ncdig++; + } + if( !exp ) ndig++; + } + *q = 0; + // Komma, Exponent mehrfach vorhanden? + if( comma > 1 || exp > 1 ) + bRes = FALSE; + // Kann auf Integer gefaltet werden? + if( !comma && !exp ) + { + if( nVal >= SbxMININT && nVal <= SbxMAXINT ) + eScanType = SbxINTEGER; + else if( nVal >= SbxMINLNG && nVal <= SbxMAXLNG ) + eScanType = SbxLONG; + } + + nVal = atof( buf ); + ndig = ndig - comma; + // zu viele Zahlen fuer SINGLE? + if( ndig > 15 || ncdig > 6 ) + eScanType = SbxDOUBLE; + + // Typkennung? + if( strchr( "%!&#", *p ) && *p ) p++; + } + // Hex/Oktalzahl? Einlesen und konvertieren: + else if( *p == '&' ) + { + p++; + eScanType = SbxLONG; + const char *cmp = "0123456789ABCDEF"; + char base = 16; + char ndig = 8; + char xch = *p++; + switch( toupper( xch ) ) + { + case 'O': cmp = "01234567"; base = 8; ndig = 11; break; + case 'H': break; + default : bRes = FALSE; + } + long l = 0; + int i; + while( isalnum( *p ) ) + { + char ch = sal::static_int_cast< char >( toupper( *p ) ); + p++; + if( strchr( cmp, ch ) ) *q++ = ch; + else bRes = FALSE; + } + *q = 0; + for( q = buf; *q; q++ ) + { + i =( *q & 0xFF ) - '0'; + if( i > 9 ) i -= 7; + l =( l * base ) + i; + if( !ndig-- ) + bRes = FALSE; + } + if( *p == '&' ) p++; + nVal = (double) l; + if( l >= SbxMININT && l <= SbxMAXINT ) + eScanType = SbxINTEGER; + } + if( pLen ) + *pLen = (USHORT) ( p - pStart ); + if( !bRes ) + return SbxERR_CONVERSION; + if( bMinus ) + nVal = -nVal; + rType = eScanType; + return SbxERR_OK; +} + +//////////////////////////////////////////////////////////////////////////// + +static double roundArray[] = { + 5.0e+0, 0.5e+0, 0.5e-1, 0.5e-2, 0.5e-3, 0.5e-4, 0.5e-5, 0.5e-6, 0.5e-7, + 0.5e-8, 0.5e-9, 0.5e-10,0.5e-11,0.5e-12,0.5e-13,0.5e-14,0.5e-15 }; + +/*************************************************************************** +|* +|* void myftoa( double, char *, short, short, BOOL, BOOL ) +|* +|* Beschreibung: Konversion double --> ASCII +|* Parameter: double die Zahl. +|* char * der Zielpuffer +|* short Anzahl Nachkommastellen +|* short Weite des Exponenten( 0=kein E ) +|* BOOL TRUE: mit 1000er Punkten +|* BOOL TRUE: formatfreie Ausgabe +|* +***************************************************************************/ + +static void myftoa( double nNum, char * pBuf, short nPrec, short nExpWidth, + BOOL bPt, BOOL bFix, sal_Unicode cForceThousandSep = 0 ) +{ + + short nExp = 0; // Exponent + short nDig = nPrec + 1; // Anzahl Digits in Zahl + short nDec; // Anzahl Vorkommastellen + register int i, digit; + + // Komma besorgen + sal_Unicode cDecimalSep, cThousandSep; + ImpGetIntntlSep( cDecimalSep, cThousandSep ); + if( cForceThousandSep ) + cThousandSep = cForceThousandSep; + + // Exponentberechnung: + nExp = 0; + if( nNum > 0.0 ) + { + while( nNum < 1.0 ) nNum *= 10.0, nExp--; + while( nNum >= 10.0 ) nNum /= 10.0, nExp++; + } + if( !bFix && !nExpWidth ) + nDig = nDig + nExp; + else if( bFix && !nPrec ) + nDig = nExp + 1; + + // Zahl runden: + if( (nNum += roundArray [( nDig > 16 ) ? 16 : nDig] ) >= 10.0 ) + { + nNum = 1.0; + ++nExp; + if( !nExpWidth ) ++nDig; + } + + // Bestimmung der Vorkommastellen: + if( !nExpWidth ) + { + if( nExp < 0 ) + { + // #41691: Auch bei bFix eine 0 spendieren + *pBuf++ = '0'; + if( nPrec ) *pBuf++ = (char)cDecimalSep; + i = -nExp - 1; + if( nDig <= 0 ) i = nPrec; + while( i-- ) *pBuf++ = '0'; + nDec = 0; + } + else + nDec = nExp+1; + } + else + nDec = 1; + + // Zahl ausgeben: + if( nDig > 0 ) + { + for( i = 0 ; ; ++i ) + { + if( i < 16 ) + { + digit = (int) nNum; + *pBuf++ = sal::static_int_cast< char >(digit + '0'); + nNum =( nNum - digit ) * 10.0; + } else + *pBuf++ = '0'; + if( --nDig == 0 ) break; + if( nDec ) + { + nDec--; + if( !nDec ) + *pBuf++ = (char)cDecimalSep; + else if( !(nDec % 3 ) && bPt ) + *pBuf++ = (char)cThousandSep; + } + } + } + + // Exponent ausgeben: + if( nExpWidth ) + { + if( nExpWidth < 3 ) nExpWidth = 3; + nExpWidth -= 2; + *pBuf++ = 'E'; + *pBuf++ =( nExp < 0 ) ?( (nExp = -nExp ), '-' ) : '+'; + while( nExpWidth > 3 ) *pBuf++ = '0', nExpWidth--; + if( nExp >= 100 || nExpWidth == 3 ) + { + *pBuf++ = sal::static_int_cast< char >(nExp/100 + '0'); + nExp %= 100; + } + if( nExp/10 || nExpWidth >= 2 ) + *pBuf++ = sal::static_int_cast< char >(nExp/10 + '0'); + *pBuf++ = sal::static_int_cast< char >(nExp%10 + '0'); + } + *pBuf = 0; +} + +// Die Zahl wird unformatiert mit der angegebenen Anzahl NK-Stellen +// aufbereitet. Evtl. wird ein Minus vorangestellt. +// Diese Routine ist public, weil sie auch von den Put-Funktionen +// der Klasse SbxImpSTRING verwendet wird. + +#ifdef _MSC_VER +#pragma optimize( "", off ) +#pragma warning(disable: 4748) // "... because optimizations are disabled ..." +#endif + +void ImpCvtNum( double nNum, short nPrec, XubString& rRes, BOOL bCoreString ) +{ + char *q; + char cBuf[ 40 ], *p = cBuf; + + sal_Unicode cDecimalSep, cThousandSep; + ImpGetIntntlSep( cDecimalSep, cThousandSep ); + if( bCoreString ) + cDecimalSep = '.'; + + if( nNum < 0.0 ) { + nNum = -nNum; + *p++ = '-'; + } + double dMaxNumWithoutExp = (nPrec == 6) ? 1E6 : 1E14; + myftoa( nNum, p, nPrec,( nNum &&( nNum < 1E-1 || nNum > dMaxNumWithoutExp ) ) ? 4:0, + FALSE, TRUE, cDecimalSep ); + // Trailing Zeroes weg: + for( p = cBuf; *p &&( *p != 'E' ); p++ ) {} + q = p; p--; + while( nPrec && *p == '0' ) nPrec--, p--; + if( *p == cDecimalSep ) p--; + while( *q ) *++p = *q++; + *++p = 0; + rRes = String::CreateFromAscii( cBuf ); +} + +#ifdef _MSC_VER +#pragma optimize( "", on ) +#endif + +// Formatierte Zahlenausgabe +// Der Returnwert ist die Anzahl Zeichen, die aus dem +// Format verwendt wurden. + +#ifdef _old_format_code_ +// lasse diesen Code vorl"aufig drin, zum 'abgucken' +// der bisherigen Implementation + +static USHORT printfmtnum( double nNum, XubString& rRes, const XubString& rWFmt ) +{ + const String& rFmt = rWFmt; + char cFill = ' '; // Fuellzeichen + char cPre = 0; // Startzeichen( evtl. "$" ) + short nExpDig= 0; // Anzahl Exponentstellen + short nPrec = 0; // Anzahl Nachkommastellen + short nWidth = 0; // Zahlenweite gesamnt + short nLen; // Laenge konvertierte Zahl + BOOL bPoint = FALSE; // TRUE: mit 1000er Kommas + BOOL bTrail = FALSE; // TRUE, wenn folgendes Minus + BOOL bSign = FALSE; // TRUE: immer mit Vorzeichen + BOOL bNeg = FALSE; // TRUE: Zahl ist negativ + char cBuf [1024]; // Zahlenpuffer + char * p; + const char* pFmt = rFmt; + rRes.Erase(); + // $$ und ** abfangen. Einfach wird als Zeichen ausgegeben. + if( *pFmt == '$' ) + if( *++pFmt != '$' ) rRes += '$'; + if( *pFmt == '*' ) + if( *++pFmt != '*' ) rRes += '*'; + + switch( *pFmt++ ) + { + case 0: + break; + case '+': + bSign = TRUE; nWidth++; break; + case '*': + nWidth++; cFill = '*'; + if( *pFmt == '$' ) nWidth++, pFmt++, cPre = '$'; + break; + case '$': + nWidth++; cPre = '$'; break; + case '#': + case '.': + case ',': + pFmt--; break; + } + // Vorkomma: + for( ;; ) + { + while( *pFmt == '#' ) pFmt++, nWidth++; + // 1000er Kommas? + if( *pFmt == ',' ) + { + nWidth++; pFmt++; bPoint = TRUE; + } else break; + } + // Nachkomma: + if( *pFmt == '.' ) + { + while( *++pFmt == '#' ) nPrec++; + nWidth += nPrec + 1; + } + // Exponent: + while( *pFmt == '^' ) + pFmt++, nExpDig++, nWidth++; + // Folgendes Minus: + if( !bSign && *pFmt == '-' ) + pFmt++, bTrail = TRUE; + + // Zahl konvertieren: + if( nPrec > 15 ) nPrec = 15; + if( nNum < 0.0 ) nNum = -nNum, bNeg = TRUE; + p = cBuf; + if( bSign ) *p++ = bNeg ? '-' : '+'; + myftoa( nNum, p, nPrec, nExpDig, bPoint, FALSE ); + nLen = strlen( cBuf ); + + // Ueberlauf? + if( cPre ) nLen++; + if( nLen > nWidth ) rRes += '%'; + else { + nWidth -= nLen; + while( nWidth-- ) rRes += (xub_Unicode)cFill; + if( cPre ) rRes += (xub_Unicode)cPre; + } + rRes += (xub_Unicode*)&(cBuf[0]); + if( bTrail ) + rRes += bNeg ? '-' : ' '; + + return (USHORT) ( pFmt - (const char*) rFmt ); +} + +#endif //_old_format_code_ + +///////////////////////////////////////////////////////////////////////// + +BOOL SbxValue::Scan( const XubString& rSrc, USHORT* pLen ) +{ + SbxError eRes = SbxERR_OK; + if( !CanWrite() ) + eRes = SbxERR_PROP_READONLY; + else + { + double n; + SbxDataType t; + eRes = ImpScan( rSrc, n, t, pLen ); + if( eRes == SbxERR_OK ) + { + if( !IsFixed() ) + SetType( t ); + PutDouble( n ); + } + } + if( eRes ) + { + SetError( eRes ); return FALSE; + } + else + return TRUE; +} + +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |