*PPD-Adobe: "4.3" *% Adobe Systems PostScript(R) Printer Description File *% Copyright 1987-1995 Adobe Systems Incorporated. *% All Rights Reserved. *% Permission is granted for redistribution of this file as *% long as this copyright notice is intact and the contents *% of the file is not altered in any way from its original form. *% End of Copyright statement *% All Rights Reserved. *% Permission is granted for redistribution of this file as *% long as this copyright notice is intact and the contents *% of the file is not altered in any way from its original form. *% End of Copyright statement *% ' *% Modification Date: July 02, 1997 *% ================================================================ *FormatVersion: "4.3" *FileVersion: "1.0" *LanguageEncoding: ISOLatin1 *LanguageVersion: English *PSVersion: "(2013.114) 9" *Product: "(Linotype)" *% 31 Chars ******************************* *Manufacturer: "LHAG Linotype-Hell" *ModelName: "Lino ColorFlash V 4.3" *ShortNickName: "Lino ColorFlash V 4.3" *NickName: "Lino ColorFlash V 4.3" *PCFileName: "LHCOFLR5.PPD" *% ================================================================ *% Basic Device Capabilities *% ================================================================ *FreeVM: "5242880" *PrintPSErrors: False *LanguageLevel: "2" *ColorDevice: True *ContoneOnly: True *DefaultColorSpace: CMYK *Throughput: "1" *FileSystem: True *?FileSystem: " save statusdict /diskonline get exec {(True)}{(False)} ifelse = flush restore " *End *Password: "0" *ExitServer: " count 0 eq { % is the password on the stack? true }{ dup % potential password statusdict /checkpassword get exec not } ifelse { % if no password or not valid (WARNING : Cannot perform the exitserver command.) = (Password supplied is not valid.) = (Please contact the author of this software.) = flush quit } if serverdict /exitserver get exec " *End *Reset: " count 0 eq { % is the password on the stack? true }{ dup % potential password statusdict /checkpassword get exec not } ifelse { % if no password or not valid (WARNING : Cannot reset printer.) = (Password supplied is not valid.) = (Please contact the author of this software.) = flush quit } if serverdict /exitserver get exec systemdict /quit get exec (WARNING : Printer Reset Failed.) = flush " *End *DefaultResolution: 400dpi *?Resolution: " save 72 72 matrix defaultmatrix dtransform pop abs round cvi =print (dpi\n) print restore " *End *% ================================================================ *% ================================================================ *% Group - CMM_Options *% ================================================================ *% ================================================================ *%----*OpenGroup: CMM_Options/CMM Options *% ================================================================ *% CMM On + RenderingIntent / Off *% ================================================================ *OpenUI *LHCMM_ON/Color Matching : PickOne *OrderDependency: 20 DocumentSetup *LHCMM_ON *DefaultLHCMM_ON: DeltaDefault *LHCMM_ON DeltaDefault/Printer's Default: "" *LHCMM_ON OnPrint/On - Print: " %LHCBeginUserItem: *CMM_ON % True %LHCEndUserItem %LHCBeginUserItem: *RenderingIntent % 1 %LHCEndUserItem " *End *LHCMM_ON OnProof/On - Proof: " %LHCBeginUserItem: *CMM_ON % True %LHCEndUserItem %LHCBeginUserItem: *RenderingIntent % 3 %LHCEndUserItem " *End *LHCMM_ON Off/Off: " %LHCBeginUserItem: *CMM_ON % False %LHCEndUserItem " *End *CloseUI: *LHCMM_ON *% ================================================================ *% CMM - ICCPrintProfile *% ================================================================ *OpenUI *LHICCPrintProfile/Printing Process : PickOne *OrderDependency: 21 DocumentSetup *LHICCPrintProfile *DefaultLHICCPrintProfile: DeltaDefault *LHICCPrintProfile DeltaDefault/Printer's Default: "" *LHICCPrintProfile Euro/Euro: " %LHCBeginUserItem: *ICCPrintProfile % Euro %LHCEndUserItem " *End *LHICCPrintProfile SWOP/SWOP: " %LHCBeginUserItem: *ICCPrintProfile % SWOP %LHCEndUserItem " *End *LHICCPrintProfile Custom1/Custom1: " %LHCBeginUserItem: *ICCPrintProfile % Custom1 %LHCEndUserItem " *End *LHICCPrintProfile Custom2/Custom2: " %LHCBeginUserItem: *ICCPrintProfile % Custom2 %LHCEndUserItem " *End *LHICCPrintProfile Custom3/Custom3: " %LHCBeginUserItem: *ICCPrintProfile % Custom3 %LHCEndUserItem " *End *LHICCPrintProfile Custom4/Custom4: " %LHCBeginUserItem: *ICCPrintProfile % Custom4 %LHCEndUserItem " *End *LHICCPrintProfile Custom5/Custom5: " %LHCBeginUserItem: *ICCPrintProfile % Custom5 %LHCEndUserItem " *End *LHICCPrintProfile Custom6/Custom6: " %LHCBeginUserItem: *ICCPrintProfile % Custom6 %LHCEndUserItem " *End *LHICCPrintProfile Custom7/Custom7: " %LHCBeginUserItem: *ICCPrintProfile % Custom7 %LHCEndUserItem " *End *LHICCPrintProfile Custom8/Custom8: " %LHCBeginUserItem: *ICCPrintProfile % Custom8 %LHCEndUserItem " *End *LHICCPrintProfile Custom9/Custom9: " %LHCBeginUserItem: *ICCPrintProfile % Custom9 %LHCEndUserItem " *End *LHICCPrintProfile Custom10/Custom10: " %LHCBeginUserItem: *ICCPrintProfile % Custom10 %LHCEndUserItem " *End *CloseUI: *LHICCPrintProfile *% ================================================================ *% CMM - ICCProofProfile *% ================================================================ *OpenUI *LHICCProofProfile/Proof Media Type : PickOne *OrderDependency: 22 DocumentSetup *LHICCProofProfile *DefaultLHICCProofProfile: DeltaDefault *LHICCProofProfile DeltaDefault/Printer's Default: "" *LHICCProofProfile MediaType1/MediaType1: " %LHCBeginUserItem: *ICCProofProfile % MediaType1 %LHCEndUserItem " *End *LHICCProofProfile MediaType2/MediaType2: " %LHCBeginUserItem: *ICCProofProfile % MediaType2 %LHCEndUserItem " *End *LHICCProofProfile MediaType3/MediaType3: " %LHCBeginUserItem: *ICCProofProfile % MediaType3 %LHCEndUserItem " *End *LHICCProofProfile MediaType4/MediaType4: " %LHCBeginUserItem: *ICCProofProfile % MediaType4 %LHCEndUserItem " *End *LHICCProofProfile MediaType5/MediaType5: " %LHCBeginUserItem: *ICCProofProfile % MediaType5 %LHCEndUserItem " *End *LHICCProofProfile MediaType6/MediaType6: " %LHCBeginUserItem: *ICCProofProfile % MediaType6 %LHCEndUserItem " *End *LHICCProofProfile MediaType7/MediaType7: " %LHCBeginUserItem: *ICCProofProfile % MediaType7 %LHCEndUserItem " *End *LHICCProofProfile MediaType8/MediaType8: " %LHCBeginUserItem: *ICCProofProfile % MediaType8 %LHCEndUserItem " *End *LHICCProofProfile MediaType9/MediaType9: " %LHCBeginUserItem: *ICCProofProfile % MediaType9 %LHCEndUserItem " *End *LHICCProofProfile MediaType10/MediaType10: " %LHCBeginUserItem: *ICCProofProfile % MediaType10 %LHCEndUserItem " *End *CloseUI: *LHICCProofProfile *%----*CloseGroup: CMM_Options *% ================================================================ *% ================================================================ *% Group - Other Options *% ================================================================ *% ================================================================ *%----*OpenGroup: OtherOptions/Other Options *% ================================================================ *% CMM - Smoothing Ð UDIs for Factor and Resolution *% ================================================================ *OpenUI *LHSmoothing/Smoothing : PickOne *OrderDependency: 24 DocumentSetup *LHSmoothing *DefaultLHSmoothing: DeltaDefault *LHSmoothing DeltaDefault/Printer's Default: "" *LHSmoothing 0/Off: " %LHCBeginUserItem: *Smoothing % 0 %LHCEndUserItem %LHCBeginUserItem: *Resolution % 400 %LHCEndUserItem " *End *LHSmoothing 2/Antialiasing 2x2: " %LHCBeginUserItem: *Smoothing % 2 %LHCEndUserItem %LHCBeginUserItem: *Resolution % 800 %LHCEndUserItem " *End *LHSmoothing 3/Antialiasing 3x3: " %LHCBeginUserItem: *Smoothing % 3 %LHCEndUserItem %LHCBeginUserItem: *Resolution % 1200 %LHCEndUserItem " *End *LHSmoothing max/Antialiasing max: " %LHCBeginUserItem: *Smoothing % 99 %LHCEndUserItem %LHCBeginUserItem: *Resolution % 1200 %LHCEndUserItem " *End *CloseUI: *LHSmoothing *% ================================================================ *% InRIP Separation Mode *% ================================================================ *OpenUI *LHInRipSeparation/Source Data : PickOne *OrderDependency: 30 DocumentSetup *LHInRipSeparation *DefaultLHInRipSeparation: DeltaDefault *LHInRipSeparation DeltaDefault/Printer's Default: "" *LHInRipSeparation True/Composite PS: " << /Separations true /ProcessColorModel /DeviceCMYK /SeparationColorNames [/Cyan /Magenta /Yellow /Black] /SeparationOrder [/Cyan /Magenta /Yellow /Black] >> setpagedevice " *End *LHInRipSeparation False/Separated PS: " << /Separations false /ProcessColorModel /DeviceGray >> setpagedevice " *End *?LHInRipSeparation: " save currentpagedevice /Separations get currentpagedevice /ProcessColorModel get /DeviceGray ne and {(True)}{(False)} ifelse = flush restore " *End *CloseUI: *LHInRipSeparation *% ================================================================ *% Mirror Print Mode *% ================================================================ *OpenUI *LHMirror/Mirror Mode : PickOne *OrderDependency: 34 DocumentSetup *LHMirror *DefaultLHMirror: DeltaDefault *LHMirror DeltaDefault/Printer's Default: "" *LHMirror True/On: " %LHCBeginUserItem: *MirrorPrint % True %LHCEndUserItem " *End *LHMirror False/Off: " %LHCBeginUserItem: *MirrorPrint % False %LHCEndUserItem " *End *CloseUI: *LHMirror *% ================================================================ *% Policies for PageSize, if job doesn't fit *% ================================================================ *OpenUI *LHPolicies/If job doesn't fit : PickOne *OrderDependency: 35 AnySetup *LHPolicies *DefaultLHPolicies: DeltaDefault *LHPolicies DeltaDefault/Printer's Default: "" *LHPolicies 0/Error message: " %LHCBeginUserItem: *Policies % 0 %LHCEndUserItem " *End *LHPolicies 1/Crop centered: " %LHCBeginUserItem: *Policies % 1 %LHCEndUserItem " *End *LHPolicies 2/Shrink to fit: " %LHCBeginUserItem: *Policies % 2 %LHCEndUserItem " *End *CloseUI: *LHPolicies *%----*CloseGroup: OtherOptions *% ================================================================ *% ================================================================ *% Group - Media Selection *% ================================================================ *% ================================================================ *OpenGroup: MediaSelection/Media Selection *% ================================================================ *% Paper Handling - PageSize *% Use these entries to set paper size most of the time, unless *% there is specific reason to use PageRegion. *% ================================================================ *OpenUI *PageSize/PageSize : PickOne *OrderDependency: 10 AnySetup *PageSize *DefaultPageSize: Unknown *PageSize A4/A4: " << /PageSize [595 842] /Orientation 0 >> setpagedevice %LHCBeginUserItem: *PageSize % A4 595 842 0 %LHCEndUserItem " *End *PageSize A4R/A4 R: " << /PageSize [595 842] /Orientation 1 >> setpagedevice %LHCBeginUserItem: *PageSize % A4R 595 842 1 %LHCEndUserItem " *End *PageSize A3/A3: " << /PageSize [842 1191] /Orientation 1 >> setpagedevice %LHCBeginUserItem: *PageSize % A3 842 1191 1 %LHCEndUserItem " *End *PageSize B5/B5-JIS: " << /PageSize [516 729] /Orientation 0 >> setpagedevice %LHCBeginUserItem: *PageSize % B5 516 729 0 %LHCEndUserItem " *End *PageSize B5R/B5-JIS R: " << /PageSize [516 729] /Orientation 1 >> setpagedevice %LHCBeginUserItem: *PageSize % B5R 516 729 1 %LHCEndUserItem " *End *PageSize B4/B4-JIS: " << /PageSize [729 1032] /Orientation 1 >> setpagedevice %LHCBeginUserItem: *PageSize % B4 729 1032 1 %LHCEndUserItem " *End *PageSize Letter/Letter: " << /PageSize [612 792] /Orientation 0 >> setpagedevice %LHCBeginUserItem: *PageSize % Letter 612 792 0 %LHCEndUserItem " *End *PageSize LetterR/Letter R: " << /PageSize [612 792] /Orientation 1 >> setpagedevice %LHCBeginUserItem: *PageSize % LetterR 612 792 1 %LHCEndUserItem " *End *PageSize Legal/Legal: " << /PageSize [612 1008] /Orientation 1 >> setpagedevice %LHCBeginUserItem: *PageSize % Legal 612 1008 1 %LHCEndUserItem " *End *PageSize Tabloid/Tabloid: " << /PageSize [792 1224] /Orientation 1 >> setpagedevice %LHCBeginUserItem: *PageSize % 11x17 792 1224 1 %LHCEndUserItem " *End *PageSize 8x10/8x10 inch: " << /PageSize [576 720] /Orientation 0 >> setpagedevice %LHCBeginUserItem: *PageSize % 8x10 576 720 0 %LHCEndUserItem " *End *PageSize 8x10R/8x10 inch R: " << /PageSize [576 720] /Orientation 1 >> setpagedevice %LHCBeginUserItem: *PageSize % 8x10R 576 720 1 %LHCEndUserItem " *End *CloseUI: *PageSize *% ================================================================ *% Paper Handling - PageRegion *% These entries will set up the frame buffer. *% Usually used with manual feed. *% ================================================================ *OpenUI *PageRegion: PickOne *OrderDependency: 11 AnySetup *PageRegion *DefaultPageRegion: Unknown *PageRegion A4/A4: " << /PageSize [595 842] /Orientation 0 >> setpagedevice %LHCBeginUserItem: *PageSize % A4 595 842 0 %LHCEndUserItem " *End *PageRegion A4R/A4 R: " << /PageSize [595 842] /Orientation 1 >> setpagedevice %LHCBeginUserItem: *PageSize % A4R 595 842 1 %LHCEndUserItem " *End *PageRegion A3/A3: " << /PageSize [842 1191] /Orientation 1 >> setpagedevice %LHCBeginUserItem: *PageSize % A3 842 1191 1 %LHCEndUserItem " *End *PageRegion B5/B5-JIS: " << /PageSize [516 729] /Orientation 0 >> setpagedevice %LHCBeginUserItem: *PageSize % B5 516 729 0 %LHCEndUserItem " *End *PageRegion B5R/B5-JIS R: " << /PageSize [516 729] /Orientation 1 >> setpagedevice %LHCBeginUserItem: *PageSize % B5R 516 729 1 %LHCEndUserItem " *End *PageRegion B4/B4-JIS: " << /PageSize [729 1032] /Orientation 1 >> setpagedevice %LHCBeginUserItem: *PageSize % B4 729 1032 1 %LHCEndUserItem " *End *PageRegion Letter/Letter: " << /PageSize [612 792] /Orientation 0 >> setpagedevice %LHCBeginUserItem: *PageSize % Letter 612 792 0 %LHCEndUserItem " *End *PageRegion LetterR/Letter R: " << /PageSize [612 792] /Orientation 1 >> setpagedevice %LHCBeginUserItem: *PageSize % LetterR 612 792 1 %LHCEndUserItem " *End *PageRegion Legal/Legal: " << /PageSize [612 1008] /Orientation 1 >> setpagedevice %LHCBeginUserItem: *PageSize % Legal 612 1008 1 %LHCEndUserItem " *End *PageRegion Tabloid/Tabloid: " << /PageSize [792 1224] /Orientation 1 >> setpagedevice %LHCBeginUserItem: *PageSize % 11x17 792 1224 1 %LHCEndUserItem " *End *PageRegion 8x10/8x10 inch: " << /PageSize [576 720] /Orientation 0 >> setpagedevice %LHCBeginUserItem: *PageSize % 8x10 576 720 0 %LHCEndUserItem " *End *PageRegion 8x10R/8x10 inch R: " << /PageSize [576 720] /Orientation 1 >> setpagedevice %LHCBeginUserItem: *PageSize % 8x10R 576 720 1 %LHCEndUserItem " *End *CloseUI: *PageRegion *% ================================================================ *% Paper Handling - ImageableArea / PaperDimension *% These entries provide information about specific paper keywords. *% In this PPD ImagealeArea is set for Canon CLC 700/800. *% ================================================================ *DefaultImageableArea: A4 *ImageableArea A4/A4: "18 2 580 834" *ImageableArea A4R/A4 R: " 2 18 587 827" *ImageableArea A3/A3: " 2 18 834 1176" *ImageableArea B5/B5-JIS: "18 2 501 721" *ImageableArea B5R/B5-JIS R: " 2 18 508 714" *ImageableArea B4/B4-JIS: " 2 18 721 1017" *ImageableArea Letter/Letter: "18 2 597 784" *ImageableArea LetterR/Letter R: " 2 18 604 777" *ImageableArea Legal/Legal: " 2 18 604 993" *ImageableArea Tabloid/Tabloid: " 2 18 784 1209" *ImageableArea 8x10/8x10 inch: "18 2 561 712" *ImageableArea 8x10R/8x10 inch R: " 2 18 568 705" *DefaultPaperDimension: A4 *PaperDimension A4/A4: "595 842" *PaperDimension A4R/A4 R: "595 841" *PaperDimension A3/A3: "842 1191" *PaperDimension B5/B5-JIS: "516 729" *PaperDimension B5R/B5-JIS R: "516 728" *PaperDimension B4/B4-JIS: "729 1032" *PaperDimension Letter/Letter: "612 792" *PaperDimension LetterR/Letter R: "612 791" *PaperDimension Legal/Legal: "612 1008" *PaperDimension Tabloid/Tabloid: "792 1224" *PaperDimension 8x10/8x10 inch: "576 720" *PaperDimension 8x10R/8x10 inch R: "576 719" *% ================================================================ *% Tray Selection *% ================================================================ *RequiresPageRegion All: True *OpenUI *InputSlot/Input Slot : PickOne *OrderDependency: 12 AnySetup *InputSlot *DefaultInputSlot: Auto *InputSlot Auto/AutoSelect: "" *InputSlot Tray1/Tray 1: " %LHCBeginUserItem: *InputSlot % Tray1 %LHCEndUserItem %LHCBeginUserItem: *ManualFeed % False %LHCEndUserItem " *End *InputSlot Tray2/Tray 2: " %LHCBeginUserItem: *InputSlot % Tray2 %LHCEndUserItem %LHCBeginUserItem: *ManualFeed % False %LHCEndUserItem " *End *InputSlot Tray3/Tray 3: " %LHCBeginUserItem: *InputSlot % Tray3 %LHCEndUserItem %LHCBeginUserItem: *ManualFeed % False %LHCEndUserItem " *End *InputSlot BypassTray/Bypass Tray: " %LHCBeginUserItem: *InputSlot % Tray0 %LHCEndUserItem %LHCBeginUserItem: *ManualFeed % True %LHCEndUserItem " *End *CloseUI: *InputSlot *CloseGroup: MediaSelection *% ================================================================ *% Font Information *% ================================================================ *DefaultFont: Courier *Font AvantGarde-Book: Standard "(001.001)" Standard Disk *Font AvantGarde-BookOblique: Standard "(001.001)" Standard Disk *Font AvantGarde-Demi: Standard "(001.001)" Standard Disk *Font AvantGarde-DemiOblique: Standard "(001.001)" Standard Disk *Font Bookman-Demi: Standard "(001.001)" Standard Disk *Font Bookman-DemiItalic: Standard "(001.001)" Standard Disk *Font Bookman-Light: Standard "(001.001)" Standard Disk *Font Bookman-LightItalic: Standard "(001.001)" Standard Disk *Font Courier: Standard "(002.002)" Standard ROM *Font Courier-Bold: Standard "(002.002)" Standard ROM *Font Courier-BoldOblique: Standard "(002.002)" Standard ROM *Font Courier-Oblique: Standard "(002.002)" Standard ROM *Font Helvetica: Standard "(001.006)" Standard ROM *Font Helvetica-Bold: Standard "(001.007)" Standard ROM *Font Helvetica-BoldOblique: Standard "(001.007)" Standard ROM *Font Helvetica-Narrow: Standard "(001.006)" Standard ROM *Font Helvetica-Narrow-Bold: Standard "(001.007)" Standard ROM *Font Helvetica-Narrow-BoldOblique: Standard "(001.007)" Standard ROM *Font Helvetica-Narrow-Oblique: Standard "(001.006)" Standard ROM *Font Helvetica-Oblique: Standard "(001.006)" Standard ROM *Font NewCenturySchlbk-Bold: Standard "(001.002)" Standard Disk *Font NewCenturySchlbk-BoldItalic: Standard "(001.001)" Standard Disk *Font NewCenturySchlbk-Italic: Standard "(001.001)" Standard Disk *Font NewCenturySchlbk-Roman: Standard "(001.002)" Standard Disk *Font Palatino-Bold: Standard "(001.000)" Standard Disk *Font Palatino-BoldItalic: Standard "(001.000)" Standard Disk *Font Palatino-Italic: Standard "(001.000)" Standard Disk *Font Palatino-Roman: Standard "(001.000)" Standard Disk *Font Symbol: Special "(001.003)" Special ROM *Font Times-Bold: Standard "(001.007)" Standard ROM *Font Times-BoldItalic: Standard "(001.009)" Standard ROM *Font Times-Italic: Standard "(001.007)" Standard ROM *Font Times-Roman: Standard "(001.007)" Standard ROM *Font ZapfChancery-MediumItalic: Standard "(001.002)" Standard Disk *Font ZapfDingbats: Special "(001.000)" Special Disk *?FontQuery: " save /str 100 string dup 0 (fonts/) putinterval def { count 1 gt { exch dup str 6 94 getinterval cvs (/) print dup print (:) print exch FontDirectory exch known { pop (Yes) } { length 6 add str 0 3 -1 roll getinterval mark exch status {cleartomark (Yes)}{cleartomark (No)} ifelse } ifelse = } {exit} ifelse }bind loop (*) = flush restore " *End *?FontList: " save FontDirectory { pop == } bind forall flush /filenameforall where { pop (fonts/*) { dup length 6 sub 6 exch getinterval cvn == } bind 128 string filenameforall flush } if (*) = flush restore " *End *% ================================================================ *% JobPatchFile Ð PS Header Sequence for CLC 700/800 Color Copier *% ================================================================ *JobPatchFile 1: " % Begin of JobPatchFile 1 % This PPD invocation contains a PostScript / comment sequence % and it is used to provide initial state for every job. %LHCBeginUserItem: *ImageableArea % A4 9 18 833 568 842 595 % A4R 9 18 586 815 595 842 % A3 9 18 833 1164 842 1191 % B5 9 18 720 489 729 516 % B5R 9 18 507 702 516 729 % B4 9 18 720 1005 729 1032 % Letter 9 18 783 585 792 612 % LetterR 9 18 603 765 612 792 % Legal 9 18 603 981 612 1008 % 11x17 9 18 783 1197 792 1224 % 8x10 9 18 711 549 720 576 % 8x10R 9 18 567 693 576 720 %LHCEndUserItem %LHCBeginUserItem: *OutputOrder % Reverse %LHCEndUserItem %LHCBeginUserItem: *Resolution % 400 %LHCEndUserItem % End of JobPatchFile 1 " *End *% The byte count of this file should be exactly 022549 or 024363 *% depending on the filesystem it resides in. *% end of PPD file for Linotype