move OCX_Control ( and subclasses ) and OCX control export to oox

add forgotten new files axbinarywriter.[ch]xx

2 files changed, 439 insertions, 0 deletions

diff --git a/oox/inc/oox/ole/axbinarywriter.hxx b/oox/inc/oox/ole/axbinarywriter.hxx
new file mode 100644
index 000000000000..408abaa1f5c7
--- /dev/null
+++ b/oox/inc/oox/ole/axbinarywriter.hxx
@@ -0,0 +1,195 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * Version: MPL 1.1 / GPLv3+ / LGPLv3+
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License or as specified alternatively below. You may obtain a copy of
+ * the License at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * Major Contributor(s):
+ * [ Copyright (C) 2011 Noel Power<noel.power@suse.com> (initial developer) ]
+ *
+ * All Rights Reserved.
+ *
+ * For minor contributions see the git repository.
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 3 or later (the "GPLv3+"), or
+ * the GNU Lesser General Public License Version 3 or later (the "LGPLv3+"),
+ * in which case the provisions of the GPLv3+ or the LGPLv3+ are applicable
+ * instead of those above.
+ */
+#ifndef OOX_OLE_AXBINARYWRITER_HXX
+#define OOX_OLE_AXBINARYWRITER_HXX
+
+#include <utility>
+#include "oox/helper/binaryoutputstream.hxx"
+#include "oox/helper/refvector.hxx"
+
+namespace oox {
+namespace ole {
+// ============================================================================
+
+/** A wrapper for a binary output stream that supports aligned write operations.
+
+    The implementation does support seeking back the wrapped stream. All
+    seeking operations (tell, seekTo, align) are performed relative to the
+    position of the wrapped stream at construction time of this wrapper.
+    Unlike it's reader class counterpart it is NOT possible to construct this
+    wrapper with an unseekable output stream.
+ */
+class AxAlignedOutputStream : public BinaryOutputStream
+{
+public:
+    explicit            AxAlignedOutputStream( BinaryOutputStream& rOutStrm );
+
+    /** Returns the size of the data this stream represents, if the wrapped
+        stream supports the size() operation. */
+    virtual sal_Int64   size() const;
+    /** Return the current relative stream position (relative to position of
+        the wrapped stream at construction time). */
+    virtual sal_Int64   tell() const;
+    /** Seeks the stream to the passed relative position, if it is behind the
+        current position. */
+    virtual void        seek( sal_Int64 nPos );
+    /** Closes the input stream but not the wrapped stream. */
+    virtual void        close();
+
+    /** Reads nBytes bytes to the passed sequence.
+        @return  Number of bytes really read. */
+    virtual void writeData( const StreamDataSequence& orData, size_t nAtomSize = 1 );
+    /** Reads nBytes bytes to the (existing) buffer opMem.
+        @return  Number of bytes really read. */
+    virtual void   writeMemory( const void* pMem, sal_Int32 nBytes, size_t nAtomSize = 1 );
+
+    /** Aligns the stream to a multiple of the passed size (relative to the
+        position of the wrapped stream at construction time). */
+    void                align( size_t nSize );
+
+    void         pad( sal_Int32 nBytes, size_t nAtomSize = 1);
+    /** Aligns the stream according to the passed type and reads an atomar value. */
+    template< typename Type >
+    inline void         writeAligned( Type nVal ) { align( sizeof( Type ) ); writeValue( nVal ); }
+    /** Aligns the stream according to the passed type and skips the size of the type. */
+    template< typename Type >
+    inline void         padAligned() { align( sizeof( Type ) ); pad( sizeof( Type ) ); }
+
+private:
+    BinaryOutputStream*  mpOutStrm;           /// The wrapped input stream.
+    sal_Int64           mnStrmPos;          /// Tracks relative position in the stream.
+    sal_Int64           mnStrmSize;         /// Size of the wrapped stream data.
+    sal_Int64           mnWrappedBeginPos;     /// starting pos or wrapped stream
+};
+
+/** A pair of integer values as a property. */
+typedef ::std::pair< sal_Int32, sal_Int32 > AxPairData;
+
+/** An array of string values as a property. */
+typedef ::std::vector< ::rtl::OUString > AxStringArray;
+
+// ============================================================================
+
+/** Export helper to write simple and complex ActiveX form control properties
+    to a binary input stream. */
+class AxBinaryPropertyWriter
+{
+public:
+    explicit            AxBinaryPropertyWriter( BinaryOutputStream& rOutStrm, bool b64BitPropFlags = false );
+
+    /** Write an integer property value to the stream, the
+        respective flag in the property mask is set. */
+    template< typename StreamType, typename DataType >
+    inline void         writeIntProperty( DataType& ornValue )
+                            { if( startNextProperty() ) maOutStrm.writeAligned< StreamType >( ornValue ); }
+    /** Write a boolean property value to the stream, the
+        respective flag in the property mask is set. */
+    void                writeBoolProperty( bool& orbValue, bool bReverse = false );
+    /** Write a pair property the stream, the respective flag in
+        the property mask is set. */
+    void                writePairProperty( AxPairData& orPairData );
+    /** Write a string property to the stream, the respective flag
+        in the property mask is set. */
+    void                writeStringProperty( ::rtl::OUString& orValue, bool bCompressed = true );
+
+    /** Skips the next property clears the respective
+        flag in the property mask. */
+    inline void         skipProperty() { startNextProperty( true ); }
+
+    /** Final processing, write contents of all complex properties, writes record size */
+    bool                finalizeExport();
+
+private:
+    bool                ensureValid( bool bCondition = true );
+    bool                startNextProperty( bool bSkip = false );
+
+private:
+    /** Base class for complex properties such as string, point, size, GUID, picture. */
+    struct ComplexProperty
+    {
+        virtual             ~ComplexProperty();
+        virtual bool        writeProperty( AxAlignedOutputStream& rOutStrm ) = 0;
+    };
+
+    /** Complex property for a 32-bit value pair, e.g. point or size. */
+    struct PairProperty : public ComplexProperty
+    {
+        AxPairData&         mrPairData;
+
+        inline explicit     PairProperty( AxPairData& rPairData ) :
+                                mrPairData( rPairData ) {}
+        virtual bool        writeProperty( AxAlignedOutputStream& rOutStrm );
+    };
+
+    /** Complex property for a string value. */
+    struct StringProperty : public ComplexProperty
+    {
+        ::rtl::OUString&    mrValue;
+        sal_uInt32          mnSize;
+
+        inline explicit     StringProperty( ::rtl::OUString& rValue, sal_uInt32 nSize ) :
+                                mrValue( rValue ), mnSize( nSize ) {}
+        virtual bool        writeProperty( AxAlignedOutputStream& rOutStrm );
+    };
+
+    /** Stream property for a picture or mouse icon. */
+    struct PictureProperty : public ComplexProperty
+    {
+        StreamDataSequence& mrPicData;
+
+        inline explicit     PictureProperty( StreamDataSequence& rPicData ) :
+                                mrPicData( rPicData ) {}
+        virtual bool        writeProperty( AxAlignedOutputStream& rOutStrm );
+    };
+
+    typedef RefVector< ComplexProperty > ComplexPropVector;
+
+private:
+    AxAlignedOutputStream maOutStrm;        /// The input stream to read from.
+    ComplexPropVector   maLargeProps;       /// Stores info for all used large properties.
+    ComplexPropVector   maStreamProps;      /// Stores info for all used stream data properties.
+    AxPairData          maDummyPairData;    /// Dummy pair for unsupported properties.
+    StreamDataSequence  maDummyPicData;     /// Dummy picture for unsupported properties.
+    ::rtl::OUString     maDummyString;      /// Dummy string for unsupported properties.
+    AxStringArray       maDummyStringArray; /// Dummy string array for unsupported properties.
+    sal_Int16           mnBlockSize;        ///
+    sal_Int64           mnPropFlagsStart;     /// pos of Prop flags
+    sal_Int64           mnPropFlags;        /// Flags specifying existing properties.
+    sal_Int64           mnNextProp;         /// Next property to read.
+    sal_Int64           mnPropsEnd;         /// End position of simple/large properties.
+    bool                mbValid;            /// True = stream still valid.
+    bool                mb64BitPropFlags;
+};
+
+// ============================================================================
+} // namespace ole
+} // namespace oox
+
+#endif
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/oox/source/ole/axbinarywriter.cxx b/oox/source/ole/axbinarywriter.cxx
new file mode 100644
index 000000000000..390b592d50d3
--- /dev/null
+++ b/oox/source/ole/axbinarywriter.cxx
@@ -0,0 +1,244 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * Version: MPL 1.1 / GPLv3+ / LGPLv3+
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License or as specified alternatively below. You may obtain a copy of
+ * the License at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * Major Contributor(s):
+ * [ Copyright (C) 2011 Noel Power <noel.power@suse.com> (initial developer) ]
+ *
+ * All Rights Reserved.
+ *
+ * For minor contributions see the git repository.
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 3 or later (the "GPLv3+"), or
+ * the GNU Lesser General Public License Version 3 or later (the "LGPLv3+"),
+ * in which case the provisions of the GPLv3+ or the LGPLv3+ are applicable
+ * instead of those above.
+ */
+#include "oox/ole/axbinarywriter.hxx"
+
+#include "oox/ole/olehelper.hxx"
+
+namespace oox {
+namespace ole {
+
+// ============================================================================
+
+using ::rtl::OUString;
+
+// ============================================================================
+
+namespace {
+
+const sal_uInt32 AX_STRING_SIZEMASK         = 0x7FFFFFFF;
+const sal_uInt32 AX_STRING_COMPRESSED       = 0x80000000;
+
+} // namespace
+
+// ============================================================================
+
+AxAlignedOutputStream::AxAlignedOutputStream( BinaryOutputStream& rOutStrm ) :
+    BinaryStreamBase( false ),
+    mpOutStrm( &rOutStrm ),
+    mnStrmPos( 0 ),
+    mnStrmSize( rOutStrm.getRemaining() ),
+    mnWrappedBeginPos( rOutStrm.tell() )
+{
+    mbEof = mbEof || rOutStrm.isEof();
+}
+
+sal_Int64 AxAlignedOutputStream::size() const
+{
+    return mpOutStrm ? mnStrmSize : -1;
+}
+
+sal_Int64 AxAlignedOutputStream::tell() const
+{
+    return mpOutStrm ? mnStrmPos : -1;
+}
+
+void AxAlignedOutputStream::seek( sal_Int64 nPos )
+{
+    mbEof = (nPos < 0);
+    if( !mbEof )
+    {
+        mpOutStrm->seek( static_cast< sal_Int32 >( mnWrappedBeginPos + nPos  ) );
+        mnStrmPos = mpOutStrm->tell() - mnWrappedBeginPos;
+    }
+}
+
+void AxAlignedOutputStream::close()
+{
+    mpOutStrm = 0;
+    mbEof = true;
+}
+
+void AxAlignedOutputStream::writeData( const StreamDataSequence& orData, size_t nAtomSize )
+{
+    mpOutStrm->writeData( orData, nAtomSize );
+    mnStrmPos = mpOutStrm->tell() - mnWrappedBeginPos;
+}
+
+void AxAlignedOutputStream::writeMemory( const void* opMem, sal_Int32 nBytes, size_t nAtomSize )
+{
+    mpOutStrm->writeMemory( opMem, nBytes, nAtomSize );
+    mnStrmPos = mpOutStrm->tell() - mnWrappedBeginPos;
+}
+
+void AxAlignedOutputStream::pad( sal_Int32 nBytes, size_t nAtomSize )
+{
+   //PRESUMABELY we need to pad with 0's here as appropriate
+   com::sun::star::uno::Sequence< sal_Int8 > aData( nBytes );
+   // ok we could be padding with rubbish here, but really that shouldn't matter
+   // set to 0(s), easier to not get fooled by 0's when looking at
+   // binary content......
+   memset( static_cast<void*>( aData.getArray() ), 0, nBytes );
+   mpOutStrm->writeData( aData, nAtomSize );
+   mnStrmPos = mpOutStrm->tell() - mnWrappedBeginPos;
+}
+
+void AxAlignedOutputStream::align( size_t nSize )
+{
+    pad( static_cast< sal_Int32 >( (nSize - (mnStrmPos % nSize)) % nSize ) );
+}
+
+// ============================================================================
+
+namespace {
+
+void lclWriteString( AxAlignedOutputStream& rOutStrm, OUString& rValue, sal_uInt32 nSize, bool bArrayString )
+{
+    bool bCompressed = getFlag( nSize, AX_STRING_COMPRESSED );
+    rOutStrm.writeCompressedUnicodeArray( rValue, bCompressed || bArrayString );
+}
+
+} // namespace
+
+// ----------------------------------------------------------------------------
+
+AxBinaryPropertyWriter::ComplexProperty::~ComplexProperty()
+{
+}
+
+bool AxBinaryPropertyWriter::PairProperty::writeProperty( AxAlignedOutputStream& rOutStrm )
+{
+    rOutStrm << mrPairData.first << mrPairData.second;
+    return true;
+}
+
+bool AxBinaryPropertyWriter::StringProperty::writeProperty( AxAlignedOutputStream& rOutStrm )
+{
+    lclWriteString( rOutStrm, mrValue, mnSize, false );
+    return true;
+}
+
+// ----------------------------------------------------------------------------
+
+AxBinaryPropertyWriter::AxBinaryPropertyWriter( BinaryOutputStream& rOutStrm, bool b64BitPropFlags ) :
+    maOutStrm( rOutStrm ),
+    mnPropFlags( 0x0 ),
+    mbValid( true ),
+    mb64BitPropFlags( b64BitPropFlags )
+{
+    sal_uInt16 nId( 0x0200 );
+    maOutStrm << nId;
+    mnBlockSize = 0; // will be filled in the finalize method
+
+    maOutStrm << nId;
+    mnPropFlagsStart = maOutStrm.tell();
+
+    if( mb64BitPropFlags )
+        maOutStrm << mnPropFlags;
+    else
+        maOutStrm << sal_uInt32( mnPropFlags );
+    mnNextProp = 1;
+}
+
+void AxBinaryPropertyWriter::writeBoolProperty( bool& orbValue, bool bReverse )
+{
+    // orbValue ^ bReverse true then we want to set the bit, e.g. don't skip
+    startNextProperty(  !( ( orbValue ^ bReverse ) >= 1 ) );
+}
+
+void AxBinaryPropertyWriter::writePairProperty( AxPairData& orPairData )
+{
+    if( startNextProperty() )
+        maLargeProps.push_back( ComplexPropVector::value_type( new PairProperty( orPairData ) ) );
+}
+
+void AxBinaryPropertyWriter::writeStringProperty( OUString& orValue, bool bCompressed )
+{
+    sal_uInt32 nSize = orValue.getLength();
+    if ( bCompressed )
+        setFlag(  nSize, AX_STRING_COMPRESSED );
+    else
+        nSize *= 2;
+    maOutStrm.writeAligned< sal_uInt32 >( nSize );
+    maLargeProps.push_back( ComplexPropVector::value_type( new StringProperty( orValue, nSize ) ) );
+    startNextProperty();
+}
+
+bool AxBinaryPropertyWriter::finalizeExport()
+{
+    // write large properties
+    maOutStrm.align( 4 );
+    if( !maLargeProps.empty() )
+    {
+        for( ComplexPropVector::iterator aIt = maLargeProps.begin(), aEnd = maLargeProps.end(); ensureValid() && (aIt != aEnd); ++aIt )
+        {
+            (*aIt)->writeProperty( maOutStrm );
+            maOutStrm.align( 4 );
+        }
+    }
+
+    mnBlockSize = maOutStrm.tell() - mnPropFlagsStart;
+
+    // write stream properties (no stream alignment between properties!)
+    if( !maStreamProps.empty() )
+        for( ComplexPropVector::iterator aIt = maStreamProps.begin(), aEnd = maStreamProps.end(); ensureValid() && (aIt != aEnd); ++aIt )
+           (*aIt)->writeProperty( maOutStrm );
+
+    sal_Int64 nPos = maOutStrm.tell();
+    maOutStrm.seek( mnPropFlagsStart - sizeof( mnBlockSize ) );
+
+    maOutStrm << mnBlockSize;
+
+    if( mb64BitPropFlags )
+        maOutStrm << mnPropFlags;
+    else
+        maOutStrm << sal_uInt32( mnPropFlags );
+
+    maOutStrm.seek( nPos );
+    return true;
+}
+
+bool AxBinaryPropertyWriter::ensureValid( bool bCondition )
+{
+    mbValid = mbValid && bCondition && !maOutStrm.isEof();
+    return mbValid;
+}
+
+bool AxBinaryPropertyWriter::startNextProperty( bool bSkip )
+{
+    // if we are skipping then we clear the flag
+    setFlag( mnPropFlags, mnNextProp, !bSkip );
+    mnNextProp <<= 1;
+    return true;
+}
+
+// ============================================================================
+
+} // namespace exp
+} // namespace ole
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */